Catálogo original · Ficha de producto
ECO053AH
Referencia ECO053AH
Metro contador electrónico de energía, montaje sobre panel frontal, analógico, monofásico.
(Corriente nominal a elegir dentro del producto)
(Corriente nominal a elegir dentro del producto)
Información conservada para consulta. Sin compra en línea.
Descripción
Front panel mounted in 3 points for fixing. The centre-to-centre distance between the top
mounting holes and the bottom one is 126 - 141 mm, which the user can select any needed
distance, in accordance with Standards BS 7856 and DIN 43857.
Can select the step motor impulse register of 5+1 digits (99999.1kWh) or 6+1 digits
(999999.1kWh) LCD display.
Can select the maintenance free lithium battery inside for LCD display to read the meter while the
power is cut.
Equipped with a polarity passive energy impulse output terminal, conforming to Standards
IEC 62053-31 and DIN 43864.
LEDs indicate the power state (green) and the energy impulse signal (red).
Automatic detection for the load current flow direction and will be indicated by LED.
Measure the active energy consumption in one direction on single phase two wire or single
phase three wire, which is not related with the load current flow direction at all, complying with
Standards IEC 62053-21.
Direct connection. For single phase two wire, two types of connections: type 1A and type 1B
for option. For single phase three wire, the connection is type 2A.
Can select the extended terminal cover or short terminal cover.
mounting holes and the bottom one is 126 - 141 mm, which the user can select any needed
distance, in accordance with Standards BS 7856 and DIN 43857.
Can select the step motor impulse register of 5+1 digits (99999.1kWh) or 6+1 digits
(999999.1kWh) LCD display.
Can select the maintenance free lithium battery inside for LCD display to read the meter while the
power is cut.
Equipped with a polarity passive energy impulse output terminal, conforming to Standards
IEC 62053-31 and DIN 43864.
LEDs indicate the power state (green) and the energy impulse signal (red).
Automatic detection for the load current flow direction and will be indicated by LED.
Measure the active energy consumption in one direction on single phase two wire or single
phase three wire, which is not related with the load current flow direction at all, complying with
Standards IEC 62053-21.
Direct connection. For single phase two wire, two types of connections: type 1A and type 1B
for option. For single phase three wire, the connection is type 2A.
Can select the extended terminal cover or short terminal cover.
Características técnicas
- Corriente de arranque:
- 0.02 / 0.04 / 0.08 A (dependiendo de la corriente nominal seleccionada)
- Corriente Nominal:
- 5(30) / 10(60) / 20(120) Seleccione
- Metro Contador
- analógico de 5 + 1 dígitos
- Prestaciones de aislamiento:
- 4 kV tensión de CA durante 1 minuto, de forma de onda de tensión de 6 kV 1.2/50us impulso.
- Voltaje de Referencia:
- 230 V
Opciones del catálogo
- Corriente Nominal
- 10 (60)A, con corriente de arranque 0.04 A
- Corriente Nominal
- 20 (120)A, con corriente de arranque 0.08
- Corriente Nominal
- 5 (30)A, con corriente de arranque 0.02
Lista de opciones registradas; no indica disponibilidad ni todas las combinaciones posibles.