Catálogo original · Ficha de producto
ECO011GC
Referencia ECO011GC
Metro contador electrónico de energía, carril DIM, digital, monofásico.
(Corriente nominal a elegir dentro del producto)
(Corriente nominal a elegir dentro del producto)
Información conservada para consulta. Sin compra en línea.
Descripción
Available as 35mm DIN standard rail mounted, conforming to Standards DIN EN 50022, as well as front PANEL mounted (the center distance between two mounting holes is 63mm or 67mm). Two mounted methods above are optional for user.
6 pole width (modulus 12.5mm), complying with Standards JB/T7121-1993.
Can select the step motor impulse register of 5+1 digits (99999.1kWh) or 6+1 digits (999999.1kWh) LCD display.
Can select two LCD displays with 6 digits, to show total power (5+1 digits display), and realtime power (4+2 digits display) which can be cleared by the red button on the nameplate. This red button can be protected by the seal and this model meter suits for the renting house.
Can select the inside load switch for the remote control credit.
Can select the inside far infrared data communication port and RS485 data communication port, the communication protocol complies with Standards DL/T645-1997, can also select the other communication protocol.
Equipped with a polarity passive energy impulse output terminal, conforming to Standards IEC 62053-31 and DIN 43864.
Two LEDs to indicate separately the power state (green) and the energy impulse signal (red).
Measure the active energy consumption in one direction on single phase two wire, which is not related with the load current flow direction at all, complying with Standards IEC 62053-21.
Direct connection for use. Two connections: type S and type T for option.
The short terminal cover is made with the transparent PC, to reduce the installation space and is convenient for centralized installation.
6 pole width (modulus 12.5mm), complying with Standards JB/T7121-1993.
Can select the step motor impulse register of 5+1 digits (99999.1kWh) or 6+1 digits (999999.1kWh) LCD display.
Can select two LCD displays with 6 digits, to show total power (5+1 digits display), and realtime power (4+2 digits display) which can be cleared by the red button on the nameplate. This red button can be protected by the seal and this model meter suits for the renting house.
Can select the inside load switch for the remote control credit.
Can select the inside far infrared data communication port and RS485 data communication port, the communication protocol complies with Standards DL/T645-1997, can also select the other communication protocol.
Equipped with a polarity passive energy impulse output terminal, conforming to Standards IEC 62053-31 and DIN 43864.
Two LEDs to indicate separately the power state (green) and the energy impulse signal (red).
Measure the active energy consumption in one direction on single phase two wire, which is not related with the load current flow direction at all, complying with Standards IEC 62053-21.
Direct connection for use. Two connections: type S and type T for option.
The short terminal cover is made with the transparent PC, to reduce the installation space and is convenient for centralized installation.
Características técnicas
- Corriente de arranque:
- 0.02 / 0.04 / 0.08 A (dependiendo de la corriente nominal seleccionada)
- Corriente Nominal:
- 5(30) / 10(60) / 20(120) Seleccione
- Metro Contador
- digital de 6 + 1 dígitos LCD
- Prestaciones de aislamiento:
- 4 kV tensión de CA durante 1 minuto, de forma de onda de tensión de 6 kV 1.2/50us impulso.
- Voltaje de Referencia:
- 230 V
Opciones del catálogo
- Corriente Nominal
- 10 (60)A, con corriente de arranque 0.04 A
- Corriente Nominal
- 20 (120)A, con corriente de arranque 0.08
- Corriente Nominal
- 5 (30)A, con corriente de arranque 0.02
Lista de opciones registradas; no indica disponibilidad ni todas las combinaciones posibles.